تاریخ کلیه باتری ها بروز سال 2023 میباشد
ماژول محافظ شارژ باتری لیتیومی 3 سل 10A ماژول باطری ۳ سل

ماژول محافظ شارژ باتری لیتیومی 3 سل 10A ماژول باطری ۳ سل

0 نظر سفارش (14)
67,349تومان
کد محصول: 32574
موجودی در انبار
تعداد بازدید 914 بازدید

توضیحات محصول

ماژول کنترل شارژ HX-3S-FL10A مناسب برای باتری های زیر می‌باشد:
سه باتری 18650: به صورت سری در مدار 3S
10.8 ولت: باتری پلیمر
11.1 ولت: باتری 18650 و باتری 3.7 لیتیوم
12.6 ولت: باتری لیتیوم یون با ولتاژ شارژ کامل
ابعاد :53x14x4 میلی متر ماسفت:D472A
ولتاژ مورد نياز :4.25 تا 4.35 ولت DC

جریان :10 امپر


کاربرد :

  • قطع جریان در صورت اتصال کوتاه شدن خروجی مدار
  • قطع جریان ورودی به باتری ها بعد از شارژ کامل باتری

دمای کاری :- 40 تا + 50 درجه سانتی گراد

ماژول شارژر و محافظ Overcharge و Discharge باتری های لیتیومی 3 تایی سری شده با ماکزیمم جریان 10 آمپر , با استفاده از این ماژول می توانید برای سه عدد باتری 18650 لپ تاپی که با هم سری شده باشد استفاده می شود. بعد از اتصال این باتری ها به برد باید ولتاژ 12.6 برای شارژ این باتری ها به برد اعمال شود.

برای مشاهده نحوه اتصال برد بالانسر به باتری سه سل به تصویر زیر مراجعه نمایید:



In 3S 10A 12V 18650 Lithium Battery Charger Board Protection Module, 3S stands for 3 18650 batteries or polymer lithium battery series combination. With 10.8V rated voltage for polymer battery, 11.1V 18650 or 3.7V lithium battery rated voltage and 12.6V lithium battery can be charged. And discharge 10A (referring to the maximum discharge current limit) Lithium battery protection board it also Comes with over-charge, over-discharge, over-current, short circuit protection. formula expansion : 1C battery expansion, 2000 capacity is equal to 2AH * 1 = 2A upper limit of current. 3C battery expansion, 2000 capacity equal to 2AH * 3 = 6A upper operating current. If the battery gets heat, does not apply that battery, such a situation cannot be long-term use, the battery will soon be damaged. Notes : 1: strictly according to the drawing wiring 0 V (B), 3.7 V (B1), 7.4 V (B2), 11.1 V (B +), not intentionally short circuit! 2: Once you have charged the first line, it will have output. 3: When connecting three battery groups, please make sure that the voltage of each battery group, if not the same, fill each battery separately and then use it in series. discharge test, the fastest battery voltage drop, which group is low battery. (2 good battery + a use effect = 3 low battery low battery use effect). Warning: The protection board can not be used for lithium iron phosphate batteries, lamp hernia, hand drill battery, electric battery fish, electric bicycle battery, car battery for children, 775 (4A) motor, 1 W fish eye LED light, please pay attention customer purchase connection! Described in terms of power for the following products: Massager rechargeable battery, LED ready light power supply, 12 V electronic products, solar street lamp battery, power backup monitor, and other products. برای خرید ماژول محافظ شارژ باتری لیتیومی 3 سل 10A به صورت اینترنتی می توانید از همین صفحه اقدام نمایید.

نظر بدهید

لطفا وارد شوید یا ثبت نام کنید تا نظر بدهید