تاریخ کلیه باتری ها بروز سال 2024 میباشد
آی سی آمپلی فایر اسپیکر بلوتوثی 18 وات CS83702E

آی سی آمپلی فایر اسپیکر بلوتوثی 18 وات CS83702E

0 نظر سفارش (674)
42,000تومان 57,750تومان -27%
کد محصول: 44366
موجودی در انبار
تعداد بازدید 9401 بازدید

توضیحات محصول

single lithium battery 3.7V power supply built-in boost 18W mono class D audio power amplifier IC

ولتاژکاری 3.7 ولت

18 وات 

آی سی آمپلی فایر و شارژ باتری لیتیومی CS83702E یک آی سی دو منظوره در پکیج SSOP16 می باشد.

این آی سی یک مدار شارژر باتری لیتیوم داخلی و همچنین یک آمپلی فایر مونو 18 وات کلاس D درون خود دارد

. از آی سی CS83702E در مدارات اسپیکر های شارژی استفاده می شود.

CS83702 (Single lithium battery 3.7V power supply built-in boost 18W mono class D audio power amplifier IC)



summary

CS83705E is a Class R monophonic device suitable for dual-power supply applications powered by single or double-cell lithium batteries and 12V adapters. It has fixed gain, three anti-crack modes, AB/D switching, mute function, and built-in BOOST boost module. Audio power amplifier. When powered by two-cell lithium batteries (7.4V), the CS83705E can drive speakers as low as 2Ω and output a maximum constant power of 26W; the design of the CS83705E AB Class D switchable mode minimizes the impact of the power amplifier in the audio subsystem. FM interference provides the ultimate power output for end products.

The CS83705E's fully differential architecture and extremely high PSRR effectively improve the ability to suppress RF noise. The filter-less PWM modulation structure and built-in BOOST boost module, as well as the CS83705E's proprietary AERC (Adaptive Edge Rate Control) technology, greatly reduce EMI interference within the full audio bandwidth range, and are suitable for 60cm audio cables. , with a margin of more than 20dB under FCC standards. In addition, CS83705E has built-in overcurrent protection, short circuit protection and overheating protection, which effectively protects the chip from damage under abnormal working conditions.

CS83705E provides a small EQA16L package for customers to choose. The package size is the same as ESOP8, and its rated operating temperature range is -40℃ to 85℃.

describe

Built-in BOOST module R class structure, integrating two modes of AB class and D class

Output Power

PO at 10% THD+N, VIN = 3.7V

  RL = 3Ω+22µH 18W(D MODE NCN OFF)

PO at 10% THD+N, VIN = 7.4V

 RL = 2Ω+22µH 26W(D MODE NCN OFF)

PO at 10% THD+N, VIN = 8.4V

  RL = 2Ω 17W(AB MODE)

Excellent "pop-noise" noise suppression capability

Working voltage range: 2.7V~12V

spread spectrum function

Pin compatible with CS83702E

Fixed 64x gain, integrated 10K input resistor, 640K feedback resistor

Built-in three anti-crack modes

Class-D structure without filtering

Up to 93% efficiency (Vbat=7.4V)

High power supply rejection ratio (PSRR): 70dB at 217Hz

Startup time (200ms)

Quiescent current (22mA)

Low shutdown current (10µA)

Overcurrent protection, short circuit protection and overheating protection

application

Portable bluetooth speaker

Trolley speaker




 



نظر بدهید

لطفا وارد شوید یا ثبت نام کنید تا نظر بدهید